OK Autrod 19.30

OK AUTROD 19.30

A continuous, solid, copper wire for the GMAW joining of copper-zinc alloys and low-alloyed copper and for the GMAW brazing of zinc-coated steel sheets. OK Autrod 19.30 is alloyed with silicon and manganese and has good flow properties and wear resistance. The alloy is widely used in the joining of zinc-coated steel sheets in car body production, as well as for overlay welding on low- and non-alloyed steels and cast iron. Pulsed GMAW is recommended. OK Autrod 19.30 is normally welded with pure Ar as the shielding gas; however, for GMAW brazing, the addition of 1% O2 improves the brazing properties.

Propiedades típicas de Tensión

As welded
Alargamiento Límite de flujo Resistencia a la tracción
40 % 130 MPa 350 MPa

Composición química

wire composition
Mn Cu Zn Si Sn Fe
0.9 % 96 % 0.05 % 3 % 0.01 % 0.05 %

Depósito

Corriente Diámetro Tensión Velocidad de Alimentación
60-165 A 0.8 mm 13-17.5 V 4.0-13.0 m/min
80-210 A 1.0 mm 12.5-18 V 4.0-12.0 m/min
150-320 A 1.2 mm 16-29 V 5-11.5 m/min
1.6 mm

 

Aprobaciones: VdTÜV; 09147
Clasificaciones: SFA/AWS A5.7; ERCuSi-A; Wire Electrode; EN ISO 24373; CuSi3Mn1; Wire Electrode

Aprobaciones vinculadas a la planta de producción. Para obtener más información, pongase en contacto con ESAB.

 

tipo de aleación: Alloyed copper (Cu + 3 % Si )

No se encontraron resultados

La página solicitada no pudo encontrarse. Trate de perfeccionar su búsqueda o utilice la navegación para localizar la entrada.